⎝⎛sag沙龙国际⎞⎠

Intercom linkage ladder control

Your current location : ⎝⎛sag沙龙国际⎞⎠ > Products > Elevator control system > Intercom linkage elevator control > Intercom linkage system structure diagram




Video introduction of DAO Intelligent Elevator Control System




梯控 特点 Features of intercom linkage ladder control

For visitors, you can achieve boarding without a card and password: first use the intercom system to call the resident. After the resident confirms the identity of the visitor, he will send an activation signal to the elevator while pressing the door open button. The IC card elevator control system sends guests to this floor Signal, when the elevator goes down to the first floor, (optional paired talk host and the outgoing call elevator will automatically go down to the first floor), after the guest enters the elevator and presses the button on the floor where the occupant lives, the elevator is registered to start, For other unauthorized floors, visitors cannot register by pressing the button; at the same time, it can also solve the problem of cross-visiting. The optional automatic elevator function can press the intercom extension elevator button to go out. At this time, the elevator will automatically go to this floor and let the elevator Waiting for people instead of people and elevators brings convenient and intelligent life; it can work with Doo parking management / access control / attendance / smart access / consumer / online patrol and other smart cards.

Functional description of intercom linkage elevator control system

1. Intelligent elevator floor personnel control system, designed for the control personnel in the elevator school box to access specific floors. Control cardholders 'access to specific permitted floors, to prevent unauthorized access to each floor to ensure security, and increase the smart reception function for visitors; control cardholders' access to specific permitted floors, to prevent unauthorized access to each floor and ensure security ;

2. The system is connected with the elevator's own system using passive contacts, and the two are completely isolated without any impact on the original performance of the elevator;

3. With section addition, deletion, query card number and floor setting, you can set the elevator control in different time periods, such as holiday time permission settings;

4, with time zone control: the system is open for a certain period of time, controlled for a certain period of time, so that the elevator automatically runs according to regulations;
Operation mode :  

1) The holder of the single-layer card (owner's card) swipes the card directly. No need to press a button again;

2) Multi-layer cards (such as property management cards such as sanitary aunts and patrol security) users swipe their cards and then have to press the authority button recorded in the card to arrive;

3) Optional keypad for passwords, which allows you to enter the elevator when you forget your card (owner walks in the morning and evening);

4) Including advanced reception card function to solve the problem of frequent reception of guests by owners;

IC卡电梯 控制系统送出客人可以到该层的信号,当电梯下到一楼时,客人进入电梯后,按下住户所住楼层的按键,则登记启动电梯,而其他未授权的楼层,访客无法按键登记; 5) For visitors, boarding can be achieved without a card and password: first use the intercom system to call the resident. After the resident confirms the identity of the visitor, the door open button will be sent to the elevator while the IC card elevator control system sends the guest to The signal of this floor, when the elevator goes down to the first floor, after the guest enters the elevator and presses the button on the floor where the occupant lives, the elevator is registered to start, while other unauthorized floors, the visitor cannot press the button to register;


5. The product comes with a self-checking device. When the system fails or is damaged, it can send a signal. It will automatically disconnect from the original system and restore the original state of the elevator without affecting the use of the elevator; and use a low-power CMOS microcomputer when power is off. Personnel and stored data can be stored for 10 years without loss
 
6, with fire signal input interface, when the passive dry contact fire switch signal is activated, the IC card elevator system does not work, the elevator returns to its original state;

7, the core uses high-performance, low-power ARM chips and uses low-power CMOS microcomputers, personnel and stored data can be stored for 10 years without loss

8. The system can perform monthly subscription or pay-per-use functions, or differentiated charge management based on the floor level, which can greatly reduce the difficulty of real estate company management.

9.Card reporting blacklist function

梯控 信息资讯访问多奥官网: hermaness.com For more intercom linkage ladder control information, visit the official website of hermaness.com

 

 


1. Working voltage: DC12V-24V / 1A
 
2. Working environment: -30 ℃ -75 ℃
 
3. Communication method: RS485 TCP / IP CAN
 
4. Maximum number of users: unlimited
 
5. Support card types: IC card, EM card, ID card, T5557 card, CPU card, etc.

6. Support biometric reading head: fingerprint, vein recognition, palm print recognition, iris, facial recognition, etc.

7. Connection method: passive dry contact
0
Site Map | Contact Us | Copyright: 2007-2015 © Shenzhen Duo Technology Co., Ltd. Website Management 粤 ICP 备 18114004 号
欢乐拼三张 欢乐拼三张 七乐彩 天天电玩城